S9 Pixmob
Colours, shows and screen art. Your lights, your way.
Set up your device
Opening your remote
Checking this browser’s saved sign-in…
Reload remoteYOUR S9 ACCOUNT
Open your remote
Verify your email once on this browser. We will remember you and open your remotes automatically next time. New here? This creates your account. No account password to create.
Sign in with email
New remote? Start with your email above. Next, we’ll help you connect its Wi-Fi and add it to your account. Read the setup guide
Looking for the controller Wi-Fi password?
Network: S9 Pixmob
Wi-Fi password: s9pixmob (all lowercase)
This is different from your email code and your home Wi-Fi password. Start with your email above while your phone is online. Then connect the remote to home Wi-Fi and use its setup link to finish.
Set up your first remote
Your account is ready. Now connect your S9 Pixmob.
Plug in. Connect. Enjoy.
Power your controller. In your phone’s Wi-Fi settings, join:
- Wi-Fi network
- S9 Pixmob
- Wi-Fi password · all lowercase
- s9pixmob
“No Internet” is normal. Stay connected.
Choose your 2.4 GHz Wi-Fi, enter its password and tap Connect and save. Wait for connected and saved, then tap Add to my email account → Continue with email.
Connection didn’t work?
Older firmware may broadcast S9-PixMob. Open older remote setup ↗, choose Save & connect, then check for an update once online.
Use your own home 2.4 GHz Wi-Fi password on the remote’s form. If the online page cannot open, copy its temporary setup link, return to normal Wi-Fi and open that link in this browser. Your verified email is remembered.
R23 setup normally opens at 192.168.50.1. Before updating an older remote, use 192.168.4.1. If your home network uses the same address range, reconnect to S9 Pixmob and use the automatic setup prompt; the remote may choose a different setup address.
Older firmware calls the Add button Pair with S9.
This browser remembers your sign-in. A new browser or phone needs one email verification to recover your remotes. You do not need to keep a setup link or code.
No remote yet? Your account will be here when you are ready. Explore S9 Pixmob.
Update your controller to use shows, Heartbeat and custom art.
Still not connected?
Check your home Wi-Fi is working, then try again.
Changed your Wi-Fi?
Join S9 Pixmob in your phone’s Wi-Fi settings. Password: s9pixmob. Open the setup prompt and save your home Wi-Fi. Your account and saved controls stay the same.
Open device setupOlder device?
Open older device setupRed
Favourites
Save this scene
Up to 12 favourites, saved to your account and available on your other phones.
Get the lights how you like them, then save a favourite.
Effects & tempo
Set the mood
Tempo & music
For manual Heartbeat. Use this phone’s microphone to match a steady beat. Lights follow an approximate 30–100 BPM tempo, not each sound. Keep this page open. Audio stays on your phone.
Microphone off.
Stop timerNo timer set
You can close your phone. Your controller must stay online; if its Wi-Fi drops, it receives Stop when it reconnects.
Light shows
Each show uses its own colours, brightness and timing. Smooth steps blend between colours; Flash and Heartbeat pulse. Choose a manual colour or effect to switch back to Controls.
Edit show
Up to 12 steps. Playback continues without your phone.
Show library
Choose a show to load into your selected slot, then tap Play. Browsing leaves your lights unchanged. Each show has its own brightness and timing.
No shows match these filters. Try another colour, name or category.
Team colours
Create a two-colour show in the selected slot, then tap Play.
Build a playlist
Choose a saved show above, then add it here. The playlist becomes one show of up to 12 steps and runs on the controller without your phone.
0 / 12 stepsImport & share a show
Share the show file with a friend. It contains colours and timing, never your account credentials or setup invitation.
A little personality
Choose an animated view below, or explore the art library and create your own.
Screen only. Your lights and shows keep running.
Pixel art · library, drawing & lettering
Pick a design, draw your own or turn an image into pixel art. For controllers with the tiny OLED screen.
Choose a ready-made design
Start with a little character
Make it yours
Draw with your finger or mouse. Keyboard: arrow keys move; Space draws or erases. The OLED displays light pixels in white.
Use an image
Simple logos and bold shapes work best. The image is converted on this device; the original file is not uploaded.
Add a name or message
0 / 24 characters
Letters, numbers and simple punctuation. Type <3 or paste a heart ♥. Other emojis are not supported. Replaces the canvas; Undo brings it back.
Sending artwork changes the screen only. Your lighting effect keeps running.
My art library 0 / 24
Saved to your account. Reuse a name to update a design. Your original browser copies can be imported from Settings.
Your saved drawings will appear here.
Controller settings
Screen setup
Blank screen? Choose SSD1306 and tap Rescan.
Remove or transfer remote
Release this remote from your email account. The remote’s assigned shows and artwork are cleared, and all your signed-in browsers lose access. Your personal account library and favourites stay with your email. For your security, confirm your email here before removing or transferring a remote. This is not needed for everyday use. Saved Wi-Fi is kept until you choose Forget saved Wi-Fi on the remote’s setup page. The next owner connects their own Wi-Fi and adds the remote using their own email and a fresh setup link. Transfer steps.
Connection details
Waiting for the controller…
My favourites & artwork
Loading your account library…
Import copies your older favourites and artwork to the email signed in above. It keeps your browser copies and does not replace matching account names. Your personal library stays with your account when you transfer a remote.
Firmware & automatic updates
Select a paired controller to see its firmware.
Updates start about 5 seconds after Off or the show finishes. Playing shows keep running.
Change the controller’s Wi-Fi
- Connect your phone to S9 Pixmob, password s9pixmob.
- Open the setup prompt, or 192.168.50.1. Older firmware uses 192.168.4.1. Tap Find networks (or Pause lights & find Wi-Fi), choose the new 2.4 GHz network and enter its password. Tap Connect and save (older versions: Save & connect) and wait for connected and saved.
- Switch your phone back to the Internet and return here. Your email account stays linked.
R23 remembers up to four working networks and reconnects automatically. A failed connection keeps the previous networks. The setup network stays available when saved Wi-Fi is out of range. Wi-Fi help · Update to R23
Your remote, one tap away.
Add S9 Pixmob to your home screen or desktop. Internet required.
Chrome on Android: open the ⋮ menu, choose Add to home screen or Install app, then confirm.
Chrome on a computer: use the install icon in the address bar, or ⋮ → Cast, save and share → Install page as app.
If you are inside another app, open this page in Chrome first. On iPhone or iPad, use Safari’s Share → Add to Home Screen. Already installed? Open S9 Pixmob from your apps.