SETUP & EVERYDAY USE
IR Remote setup
Sign in with email, connect your Wi-Fi, then add your remote.
R23 is available for new and existing remotes. It remembers up to four working Wi-Fi networks and reconnects when you move between them. Update an existing remote.
Keep these handoff steps
A concise handoff sheet covers first setup, changing Wi-Fi, transferring ownership and updates. The detailed instructions below remain the full guide.

Scan for the current guide, or open
s9sentinel.com/controller-guide/.
At a glance
- USB power + 2.4 GHz Wi-Fi with internet
- First, verify your email while your phone is online
- Then connect the remote to Wi-Fi and add it to that account
What you need
- An S9 infrared controller with its supplied firmware, USB power, a phone or computer, and a 2.4 GHz Wi-Fi network with internet.
- You also need compatible infrared PixMob lights.
- A phone alone cannot transmit the controller’s infrared commands.
- S9 Pixmob is an independent product from Signal Nine Sentinel Inc.
- Not affiliated with or endorsed by PixMob.
- Compatibility depends on the light’s model and firmware; radio-only models cannot receive infrared commands.
First connection · four short steps
- Verify your email while online. Open S9 Pixmob in your usual browser. Tap Email me a code and enter the six-digit code. Your browser remembers you.
- Join the controller. Plug it into USB power. In your phone’s Wi-Fi settings, choose S9-PixMob.
Wi-Fi password: s9pixmob — all lowercase. “No Internet” is expected; choose Stay connected. - Choose your Wi-Fi. Open the automatic setup prompt, or 192.168.50.1. Older firmware uses 192.168.4.1. Tap Find networks, choose your 2.4 GHz Wi-Fi and enter its password. Tap Connect and save (older versions: Save & connect). Wait for the page to confirm that Wi-Fi is connected and saved.
- Add it to your email account. Tap Add to my email account, then Copy temporary setup link. Switch your phone back to its usual Internet connection. Paste the link into the same browser you verified earlier, then tap Add remote to my account. If already online, Continue with email opens the same link.
Three different things: the email code verifies you; s9pixmob joins the controller; your router’s password connects the controller to your home Wi-Fi. There is no separate account password to create.
- Setup links expire after 15 minutes; create a fresh one on the controller if needed.
- Older firmware calls the Add button Pair with S9. Once connected, follow Update to R23.
- A Wi-Fi pop-up may open a different browser: paste the link into your usual browser to keep your sign-in.
- On another phone or after clearing cookies, verify the same email to recover your remotes.
Install S9 Pixmob
Open S9 Pixmob in Chrome and choose Install app in the Settings tab. If the prompt is not available, the button shows the steps for your browser. On Android, Chrome’s menu offers Add to home screen or Install app. On a computer, use the address-bar install icon or Cast, save and share → Install page as app.
- The app opens directly to your remote.
- If it asks you to sign in, verify the same email address you used to add the remote.
- Internet and a connected S9 controller are still required.
- The remote loads the latest website when you reopen or reload it; controller firmware updates are separate.
Everyday use
In the Screen tab, choose the OLED view or artwork. Display power and brightness controls appear only on firmware that supports them; R23 keeps the existing display and light-show behaviour.
The controller stays powered and connected to its own Wi-Fi. Your phone can use another internet connection, including mobile data. Select a colour or effect; saved shows can play without keeping your phone open.
- Applied means the controller accepted the command.
- Infrared is one-way: the website cannot confirm that the light received it.
- Keep the emitter facing the light with a clear path.
- Point it at the lights when pressing Off too: a light that misses that command may retain its last colour until its own timeout.
Make it your own
- Use Controls for colours, effects, tempo, favourites and the stop timer; Shows for saved shows, themes and playlists; Screen art for the OLED and pixel designs; and Settings for Wi-Fi, updates and setup.
- Switching tabs keeps playback and unsaved edits in place.
- The Off button is always available.
- Gentle colour changes: Smooth colour steps blend into the next colour and brightness, including across a repeating show.
- Blend time sets how long each transition takes, up to the step duration.
- Try Neon night, Ocean, Forest or Sunset.
- Flash and Heartbeat deliberately pulse; Party lights uses Flash.
- Each show uses its own step colours, brightness and timing.
- The Controls brightness and speed sliders do not dim or retime a show.
- Selecting a manual colour or effect switches back to your saved manual settings.
- Artwork and screen changes keep playback running.
Favourites remember a colour, effect, brightness and speed. Save up to 12 to your email account and open them on your other signed-in devices. Party view gives you larger buttons and tucks the editors away; choose Full controls to return.
- Themes, playlists and sharing tools sit in the Shows tab.
- Choose a theme or two team colours, edit it, then tap Play.
- To make a playlist, select a show and add it, then repeat with the next show.
- Load the playlist into the selected slot.
- A playlist can contain up to 12 steps; shuffle changes the order when you load it, and Repeat replays that order.
- Shows continue on the controller after you close your phone.
- Stop timer sends Off after 15, 30 or 60 minutes.
- It is saved on the service, so you can close your phone.
- The controller must remain connected to the internet.
- If its connection drops, it receives Stop when it reconnects; this is not an offline cutoff.
- Controls → Tempo & music uses your phone microphone, with permission, to estimate a steady 30–100 BPM tempo for Heartbeat.
- Faster beats may be followed at half tempo.
- This is approximate tempo matching, not beat-perfect audio synchronisation.
- Keep the page visible.
- Stop listening or hide the page to release the microphone; the last lighting effect keeps running.
- Use Off to stop the lights.
- Audio is processed on your phone and is not uploaded.
Settings → Screen controls automatically hides OLED tools when no screen is detected. Choose Show OLED controls if you have a screen that needs driver setup, or No screen for a simpler remote.
Change Wi-Fi or visit another house
- Join S9-PixMob on your phone. Password: s9pixmob. Stay connected when it says “No Internet”.
- Open the setup prompt. Tap Find networks, or Pause lights & find Wi-Fi if a show is playing.
- Choose the new 2.4 GHz Wi-Fi, enter its password and tap Connect and save. Allow up to 30 seconds. A failed connection shows an error and keeps your working saved networks.
- Once connected and saved, return your phone to normal Wi-Fi or mobile data and open S9 Pixmob. Use your existing account; no need to add the same remote again.
R23 setup normally opens at 192.168.50.1. Before updating an older remote, use 192.168.4.1. If your home network uses the same address range, reconnect to S9-PixMob and use the automatic setup prompt; the remote may choose a different setup address.
R23 remembers up to four working networks and tries them automatically. To add a hidden network, enter its exact name. A 5 GHz-only network is not supported. If a network is missing, check 2.4 GHz is enabled and move closer.
If something does not work
Controller offline
Check USB power and Wi-Fi. Follow Change Wi-Fi below. Keep S9-PixMob connected even if your phone says “No Internet”. Commands stay saved while the remote reconnects. Changing Wi-Fi keeps the same email account.
Online, but the lights do not respond
Check the light’s batteries, infrared compatibility and the emitter’s direction. Move closer and try Hold with a bright colour. An Applied message confirms controller receipt only.
The tiny screen is blank
On controllers with a screen, choose its correct OLED driver and tap Rescan. Find the driver under Settings → Screen setup. Contact S9 if you are unsure which screen is fitted.
Update to R23 · new or existing remote
- Connect the remote to Wi-Fi with Internet and keep USB power connected. A new remote supplied with older firmware follows these same steps.
- Open S9 Pixmob, select your remote and tap Off when you are ready to stop the lights.
- Open Settings → Firmware & automatic updates → Check for updates. Leave the remote connected while it downloads and restarts.
- Wait for it to reconnect, then check that the firmware reads R23. Your email account, shows and artwork stay saved.
If the remote cannot get online, use the older setup address 192.168.4.1 while joined to S9-PixMob. Try an available 2.4 GHz network or phone hotspot. An offline remote cannot download the fix; contact S9 if it still cannot connect.
- Your controller checks in the background after connecting, every 15 minutes and when playback ends.
- With current firmware, installation starts about 5 seconds after Off or a show finishes.
- Playing shows keep running; a looping show waits until you stop it.
- Keep USB power and Wi-Fi connected.
- You can close the app; account ownership, shows and artwork stay saved.
- See Settings → Firmware & automatic updates for progress or an optional update check.
- That section shows the timing for the firmware currently installed on your controller.
If an update does not complete
The controller keeps its current firmware and retries after five minutes. Check USB power and Wi-Fi. If it keeps failing, ask S9 for help.
Saved designs and access
- Shows and the artwork you send to the OLED are saved to the controller service and can be loaded after signing in with the owning email address.
- In Pixel art, choose a ready-made design, draw your own, create lettering or import an image.
- Save & show on OLED sends the drawing without changing your lighting effect.
- To clear the screen artwork, use Clear followed by Save & show on OLED.
- My art library keeps up to 24 named designs in your email account.
- Favourite scenes are also saved to your account.
- Download selected show saves a shareable S9 show file; importing it loads a draft into the selected slot for you to review and play.
- These files contain design settings and do not grant controller access.
- Sign in with the same email to open your personal library on another phone. In Settings → My favourites & artwork, use Import this browser’s saved items to copy older browser-only designs and favourites. Import keeps the original browser copies and does not replace matching account names. Download PNG copies for an additional backup.
- Imported images are converted on your device; only the converted pixel drawing is sent when you save it to the OLED.
Remove or transfer remote releases the remote from your email account after a recent email verification and confirmation. In Settings, open Remove or transfer remote and choose Confirm email for removal; ordinary use does not require repeating verification. All browsers using that account lose control. The remote’s assigned shows and artwork are cleared, and Off is queued for its next connection. Your personal account favourites and art library remain with your email account. Releasing ownership does not erase saved Wi-Fi passwords. Before handing it over, join S9-PixMob and choose Forget saved Wi-Fi. The next owner connects their own Wi-Fi, taps Add to my email account and verifies their own email using a fresh setup invitation (R20 or newer). To add another new remote to your own account, choose Settings → Add another remote and use the same verified email. Old setup links cannot reclaim it. Changing Wi-Fi or clearing cookies does not transfer ownership. Device-local copies may remain until it reconnects; check it online before handing it over. If the previous owner is unavailable, contact S9 for ownership verification. Read about saved information.
Need a hand?
Tell us your product and what you see.
