S9 SENTINEL
All products

STANDALONE POWER MONITOR · IN DEVELOPMENT

S9 Monitor

See what your device is using.

Measure voltage, current, power and energy on the connected circuit. Read it on the OLED, or view saved readings over Wi-Fi in the S9 Monitor app.

S9 Monitor shield logo

AT THE DEVICE

Your readings, your screen

Choose a large watts, current or voltage view, or show energy, test sessions and status. Optional buzzer alerts can be configured or switched off.

IN THE APP

A separate Monitor dashboard

Link your monitor to your account to view readings and history. A connected, powered monitor can receive supported remote controls, including a new test and a test beep.

Availability

The current prototype is a 5 V USB monitor. The specifications below show what has been checked and what still needs verification. Pricing and availability are not final.

Ask about S9 Monitor

CURRENT USB PROTOTYPE

S9 Monitor specifications

Verified features and checks for the current build. Final continuous-load and accuracy ratings are still being established.

Power & connections

Supply
Regulated 5 V DC through USB-C
Device output
5 V USB-A cable
Input fuse
3 A replaceable fuse
Load check
About 1.2 A in a short bench test
Continuous maximum
Not yet verified

This is a 5 V unit. Its fuse is not an automatic current limiter. Monitoring and alerts do not disconnect the load.

Readings & controls

  • Voltage, current, power and accumulated energy
  • OLED with selectable reading layouts
  • Wi-Fi account access and saved history
  • Test sessions, saved totals and export
  • Optional buzzer alerts, mute and test beep
  • Supported remote controls while connected
  • Optional browser notifications with permission
How small a change can it measure?

The sensor’s raw current increment is 0.25 mA; its voltage increment is 1.25 mV. Resolution is not an accuracy guarantee.

Reference checks were made at approximately 5.21 mA and 10.36 mA, with typical readings of 5.00 mA and 10.00–10.25 mA. A full-range accuracy percentage has not been established.

The main display shows 0 W / 0 mA within its ±1 mA near-zero range to avoid idle flicker. Raw readings are retained separately. Averaging can miss very short current peaks.

What still needs verification?
  • Continuous load capacity and connector temperature in the finished enclosure
  • Accuracy across the intended voltage, current and temperature range
  • Water resistance of the finished enclosure and cable seals

No waterproof or IP rating is claimed. Wireless updates are available in the app under Settings → Software updates. Older firmware may need a one-time USB update first.

Put S9 Monitor on your home screen.

Install the web app for a dedicated S9 Monitor icon. Your account and readings work in the browser too.

Install S9 Monitor

On iPhone or iPad, open the app in Safari and choose Share → Add to Home Screen. Other supported browsers offer Install app.