S9 SENTINEL
← All help topics

HELIOS & S9 MONITOR · QUICK START

Connect once. Open it anytime.

Keep the monitor nearby. Have your home 2.4 GHz Wi-Fi password and access to your email.

  1. Connect your device

    Plug it in, open setup below and tap Connect my device. Accept your phone’s connection request and use the supplied PIN if asked. The app opens the next screen automatically.

  2. Save your Wi-Fi and account

    When asked, choose your home 2.4 GHz Wi-Fi and enter its password. The app continues to your account automatically. Use the same email if you already have an S9 account; enter a verification code only if asked. Your dashboard opens when the first usable reading arrives.

    Already connected or signed in? The app skips those steps.

Set up S9 Monitor Set up S9 Helios

Everyday use

Open My devices and choose your device. The app remembers the connection. For live readings, keep your phone on the same home Wi-Fi; you do not need to join the device’s setup network.

On a new phone, sign in with the same email. Your device is already saved—do not add it again.

Saved readings normally update about every 15 minutes. Check the reading time; you can close the app between visits.

Open my device

S9 Monitor: three simple tabs

Resetting a test does not reset live voltage, current or watts. Those continue to show what the connected device is using.

Open S9 Monitor →
Something did not work?
  • Monitor not found: check its power and stay nearby. Use the Wi-Fi option if browser Bluetooth is unavailable.
  • Wi-Fi failed: check the password, use 2.4 GHz and move closer to the router. Retry the connection step.
  • Email code missing: check the address and spam folder. Use the newest code. Never share it with anyone.
  • Already linked: sign in with the email used before. A different owner must release it before you can claim it.
  • Reading delayed: check the monitor’s power and home internet. Keep the existing account link; do not restart setup.
Help with delayed readings →

No first reading yet? Leave the monitor powered on with home internet. Use Check again on the Ready page. You can open saved readings while waiting; do not add the monitor again.

If your phone cannot use the first connection method, open Connection didn’t work? on the setup screen. That fallback may require joining the device’s setup Wi-Fi once. Return to your usual Wi-Fi afterwards; setup continues automatically, with a Continue setup link available if needed.

Still stuck? Contact S9. Tell us the step and the message you see. Never send a password or verification code.

Keep these handoff steps

Change Wi-Fi

In S9 Monitor, open Settings → Account & Wi-Fi → Connect to change Wi-Fi, then follow the connection steps. On S9 Helios, use Settings → Wi-Fi & Bluetooth → Change network. Your account link stays in place.

Give it to someone else

Download any readings you want to keep. In S9 Monitor: Settings → Account & Wi-Fi → Sign-in & monitors → Remove or transfer monitor. On S9 Helios, open Settings → Sign-in & monitors. Verify your email and confirm. This deletes the monitor’s remote history and reports; local readings and Wi-Fi remain. Separately forget the old network in local settings for a physical handoff. The new owner connects nearby and adds it with their own email. Transfer details.

Update

Check Firmware updates for your model. Install only an update offered for that exact monitor. Keep power and home Wi-Fi connected throughout. Refreshing the app does not update the hardware.

If something stops

Check power, 2.4 GHz Wi-Fi and the password. For delayed uploads, keep the existing account link and check home Internet; do not repeat setup. For a missing activation, contact S9. Connection help.

QR code for Energy quick start
Energy quick start

Scan for the current guide, or open
s9sentinel.com/support/monitor-guide/.