S9 SENTINEL

COMPLETE SOLAR POWER PACK

S9 Helios.

Choose your battery reserve and whether you want phone readings.

Four clear options

POWER PACK

1 cell

C$138.75

  • 3,500 mAh · 12.6 Wh
  • 140 × 140 mm array
  • Matching adjustable mount
  • No app needed for power
Request this option
POWER PACK

3 cells

C$178.65

  • 10,500 mAh · 37.8 Wh
  • 145 × 290 mm array
  • Matching adjustable mount
  • No app needed for power
Request this option
BUILT-IN MONITOR

1 cell + monitor

C$188.35

  • 3,500 mAh · 12.6 Wh
  • 140 × 140 mm array
  • Matching adjustable mount
  • Solar + battery readings
Request this option
BUILT-IN MONITOR

3 cells + monitor

C$228.75

  • 10,500 mAh · 37.8 Wh
  • 145 × 290 mm array
  • Matching adjustable mount
  • Solar + battery readings
Request this option

One camera. More time between charges.

The no-monitor pack powers your camera without running an ESP or sensor boards. Here is the same camera compared across all four options.

Estimated runtime from a full pack, with no solar input
PackDaily useEstimated runtime
1 cell · no monitor1.67 Wh/dayAbout 6.0 days
1 cell + monitor2.45 Wh/dayAbout 4.1 days
3 cells · no monitor1.67 Wh/dayAbout 18.1 days
3 cells + monitor2.45 Wh/dayAbout 12.3 days

About 47% longer estimated runtime without the monitor, compared with the same battery size and camera. Solar can extend operation; this runtime calculation is for one device, not spare power for a second device.

What this estimate uses

One reference camera using 1.67 Wh/day at 5 V, from the owner’s earlier measurement. Your camera’s activity, signal strength and temperature can change its use.

Rated storage is 12.6 Wh per cell. We allow 80% of that energy for delivery to the load after losses and reserve. This is a planning allowance, not a measured efficiency or discharge-test result.

Monitor versions add an estimated 0.78 Wh/day for the ESP and powered sensor boards. Firmware 1.12.62 averaged 0.03255 W during a one-hour USB-input measurement on November 1, 2026 (0.03255 Wh measured). The saved capture and monitor checks were checked against the saved records. The daily figure is a projection, not a 24-hour run or independent calibration; Wi-Fi conditions and use can change it. See the measurement and its limits.

No-monitor versions add zero monitor consumption. Runtime = rated battery energy × 80% ÷ camera and monitor daily use. The solar array size does not change this no-solar calculation.

Included with every unit

Helios protective body and cover
  • Rechargeable cell or cells
  • Protective body and cover
  • Solar array and matching adjustable mount
  • Solar charging + Micro-USB charging input
  • Regulated 5 V USB-A output · up to 1 A total

USB cables, USB charger and your camera/radio are not included. Rated battery energy is not usable output energy.

The 290 × 290 mm format and other custom combinations are quoted separately. Bring a suitable device power cable and a Micro-USB charging cable for USB charging. No Wi-Fi is needed to supply power.

Planning for winter?

Complete-unit winter operation has not been validated. Ask S9 before ordering for freezing conditions.

Photos

1 cell · power pack

Included array: 140 × 140 mm smaller array with its matching adjustable mount.

Simple solar power for a small 5 V device. A single battery stores energy for use after sunset, with solar and USB charging built in.

3 cells · power pack

Included array: 145 × 290 mm larger rectangular array with its matching adjustable mount.

More battery reserve between sunny days. Three cells provide three times the rated storage of the single-cell version, with the larger 145 × 290 mm rectangular array and its matching mount included.

1 cell + monitor

Included array: 140 × 140 mm smaller array with its matching adjustable mount.

The single-cell power pack with built-in solar and battery monitoring. Check energy collected, battery use and estimated time remaining from your phone.

3 cells + monitor

Included array: 145 × 290 mm larger rectangular array with its matching adjustable mount.

Our largest battery reserve with built-in monitoring. Track solar production and battery use while three cells store more energy for nights and cloudy periods.

Specifications & monitor features

Specifications

Size with mount
1-cell: 140 × 140 mm solar format, approximately 112 mm front-to-back with the small mount. 3-cell: 145 × 290 mm array before casing; array casing approximately 166 × 332.2 mm (nominal current frame; excludes mount). Its larger mount and battery body add depth, confirmed before ordering. Custom arrays and changed mounts alter the overall size. Leave space for cables.
Device output · USB-A
Use a USB-A cable with the correct plug for your device. Regulated 5 V; the charger module is manufacturer-rated up to 1 A (5 W) total, including the built-in monitor where fitted. Available runtime depends on your device’s energy use and sunlight.
Solar array
1-cell: four-panel 140 × 140 mm array, approximately 4.2 W combined supplier rating; 0.45 A battery charging observed outdoors. 3-cell: two-panel 145 × 290 mm array, 6 W combined supplier rating before conversion to 5 V; 0.65 A battery charging observed outdoors. Supplier ratings and measured battery-charging current describe different things. Finished-array peak output is not independently verified; charging varies with conditions. Arrays can be changed to suit your needs, using the appropriate connection and matching mount. Explore standard, upgraded and custom arrays.
1-cell battery
One rechargeable EVE INR18650-35V lithium-ion cell: 3,500 mAh at 3.6 V, or 12.6 Wh rated energy.
3-cell battery
Three matching EVE INR18650-35V cells in parallel: 10,500 mAh at 3.6 V, or 37.8 Wh rated energy. The larger 145 × 290 mm rectangular array and matching mount are included. Other array sizes and custom upgrades are available by request.
Battery temperature limits
EVE cell ambient ratings: charging 0–45 °C; discharging −20–60 °C. These are cell ratings, not a tested operating range for the complete unit. Temperature and charging guidance.
Charging
Solar charging plus a Micro-USB charging input. Use a regulated 5 V USB charger rated at least 1 A and a suitable Micro-USB cable. Disconnect the powered device while charging from a 1 A supply. The charger module is manufacturer-rated for up to 900 mA; actual battery charging depends on sunlight, battery state and the charger.
Included cables & charger
USB charging cable, device power cable and USB charger are not included. Choose the correct device-end plug for your equipment.
Charging features
Adjusts charging as the battery fills and restarts charging when needed. USB charging takes priority while a charger is connected. The USB output supports small loads without a low-current auto-off.
Built-in protection
Battery overcharge, overdischarge and overcurrent protection, plus output short-circuit protection.
Body & mount
Protective body and cover with a mount matched to the included array. The 1-cell small mount wall plate is nominally 40.8 × 75.6 mm, with four 4.8 mm holes on a 28.8 × 52.8 mm pattern. The larger 3-cell mount has different dimensions; confirm its fixing pattern before drilling. Mount using outdoor-rated, corrosion-resistant screws and anchors suited to the surface. Fixing and sealing instructions. Ask S9 to confirm the finished unit’s weight if mounting load capacity is limited. Replacement arrays, bodies, covers and mounts are available separately.
  • Rated energy uses the supplied cell listing’s 3.6 V nominal voltage; usable energy is lower.
  • A 5 V / 1 A output rating does not mean the solar array can sustain a 5 W device around the clock.
  • Check both your device’s peak demand and daily energy use.

See our recorded solar and battery results.

What does the monitor add?

  • Both Monitor versions include separate solar and battery measurements.
  • See solar power now, energy collected today, battery used, estimated battery level and time remaining.
  • Time remaining appears after enough battery use is recorded.

Compare solar in gold, battery charging in blue and battery use below zero in purple on the history chart. View nearby over Wi-Fi on iPhone or Android, or Bluetooth in Android Chrome. Use it in your browser, or install S9 Helios for live connections and saved readings in one app.

See saved updates when your monitor has home Wi-Fi with internet. Choose Connect your device, choose Add to my account and verify your email.

  • Wi-Fi Ready provides home access while the processor saves power between tasks. Bluetooth Ready provides nearby Android access. Neither uses timed connection windows.
  • Live View uses more power; use it briefly to check or position your panel.

The monitor also uses battery power. Battery level and time remaining are estimates and change with device use. Versions without a monitor provide power without readings, connection settings or remote viewing.

Monitor setup · Help & troubleshooting

How do I connect?

Use nearby Bluetooth with Android Chrome, or home Wi-Fi with iPhone and Android. the apping opens directly from your monitor. For away-from-home access, sign in with your email for remote viewing. Your monitor needs home Wi-Fi with internet; choose Add to my account Nearby and verify your email the first time. Use it in your browser, or install S9 Helios for live connections and saved readings in one app.

Follow the setup steps

What do the numbers mean?

Watts (W): power right now. A higher solar reading means more power is being collected.

Watt-hours (Wh): energy collected or used over time.

Open Battery details or Solar details for voltage (V) and current (mA). Solar is gold; battery charging is blue and battery use below zero is purple.

How long are readings kept?

  • Your monitor keeps solar and battery minute readings for 24 hours, hourly summaries for 30 days and daily summaries for a year.
  • S9 keeps quarter-hour readings online for 30 days and daily summaries for a year.

Readings save automatically every five minutes. Use Menu → Settings → Advanced monitor options → Save before unplugging to keep the latest ones. Download readings saves a copy you can open in a spreadsheet.

Ordering, delivery & warranty

Before you order

Availability & delivery
Availability confirmed before payment. Canada and U.S. enquiries are welcome; shipping eligibility and the available carrier service are confirmed for your address before payment. In-stock orders dispatch within 3–5 business days. Built-to-order units usually take about 7 days to assemble; supplier shortages may extend this. Before payment, we confirm availability, your expected dispatch date, shipping destination and total. Prices are in CAD; tax and shipping are quoted separately. Carrier delivery time is additional.
Support
We normally reply within 24–48 hours. Send an enquiry with your model and question.
Warranty & returns
6-month defect warranty from delivery, covering the S9 Helios unit, electronics and battery. Normal wear and gradual battery capacity loss are excluded. 15-day change-of-mind returns for complete, undamaged standard units. See coverage, shipping costs and return instructions.
Your device & cable
For compatible 5 V USB devices, up to 1 A / 5 W total, including the monitor where fitted. Check peak demand and daily energy use. USB charging and device power cables, a USB charger, camera and radio are not included. Send us the device model if you need a compatibility check.
Cold & weather exposure
No verified weatherproof or IP rating. Keep electrical connections dry and follow the mounting instructions supplied with your unit. Do not submerge or pressure-wash. Winter operation has not yet been validated. Check with us before ordering for freezing conditions.

How ordering works

  1. Send an enquiry. Use Request this unit to tell us which version you want and your shipping destination. An enquiry does not place an order or take payment.
  2. Confirm the details. S9 confirms the unit, availability, expected dispatch date, delivery charges and total before payment. Supplier delays can affect built-to-order units.
  3. Complete your purchase. We provide the confirmed purchasing details. If you buy through an Etsy listing, checkout and order updates are in Etsy; contact S9 through that order for purchase support.

Read the S9 Helios setup & care guide · Enquiries & privacy

Warranty & return details

  • S9 Helios warranty: Signal Nine Sentinel Inc. covers defects in materials and workmanship for 6 months from delivery.
  • This includes the assembled S9 Helios unit, electronics and battery.
  • We repair or replace covered faults; if neither is possible, we refund the product price.
  • Normal wear and gradual battery capacity loss are excluded, as is damage caused by misuse, incorrect power, accidents or use outside the supplied instructions.
  • Change-of-mind returns: Contact us within 15 days of delivery.
  • Standard units must be undamaged and returned with their included parts; reasonable inspection is allowed.
  • You pay return shipping, and original delivery charges are not refunded.
  • There is no restocking fee.
  • After inspection, the product price is refunded to the original payment method.
  • Any different terms for a custom build are agreed before payment.

Faults & return shipping: S9 covers agreed shipping costs for covered defects. The change-of-mind return conditions above do not determine your rights when a product is faulty, incorrect or not as described.

Start with S9: Email support@s9sentinel.com with your order reference and a description of the issue or return request. Contact us before sending anything back so we can provide the return address and shipping instructions.

Your legal rights: This warranty and return policy are additional to your rights under applicable consumer law. Those rights are not limited to the 6-month warranty or 15-day return period.

Check compatibility, shipping or a custom request

For compatible 5 V USB devices, up to 1 A / 5 W total. Cables and USB charger are not included. Winter operation has not yet been validated. Check with S9 before ordering for freezing conditions.

  • Cold-weather charging and heater controls are in development. They are not included in current S9 Helios packs or verified for winter use.
  • These revisions still require assembled-board qualification and are not standard equipment in the units listed here.

Prices in CAD. Tax and shipping extra. Availability, fit and the complete total are confirmed before payment.

Fit your matching mount

Identify your mount and follow the short installation guide.

Open the mounting guide

Assembling a printed array?

Assembling or mounting your array? Use the guide for your matching mount.

Illustrated array assembly →