CUSTOMER HANDOFF · UPDATED 19 NOVEMBER 2026
Your S9, ready to hand over.
Quick steps for setup, everyday use and a new owner.
Energy and IR can use the same email, but have separate sign-in sessions. Neither requires creating the same device again on a new phone. Browser-login and work/school username Wi-Fi networks are not supported.
S9 Helios / S9 Monitor
Keep your monitor, 2.4 GHz Wi-Fi password and email nearby.
- Connect. Power the monitor. Open Start setup → Find my monitor and select your monitor. Its setup Wi-Fi is S9 Helios or S9 Monitor; older units and Bluetooth names may show S9-Energy. Use Connect using Wi-Fi instead when browser Bluetooth is unavailable.
Join home Wi-Fi. After connecting, choose your network in the Wi-Fi form → enter its password → Connect to Wi-Fi. Wait for confirmation. - Add to your account. Continue to my account opens sign-in directly when your phone has internet. On setup Wi-Fi, use Add to my account if shown, return your phone to home Wi-Fi or mobile data, then continue. Verify the email code to finish linking, or confirm Add to my account if already signed in. Wait for the first usable upload; do not repeat setup.
Choose my monitor →
Everyday use
Open saved readings. On a new phone, use the same email; do not add the monitor again. Uploads normally arrive about every 15 minutes. Check the As of time before comparing saved and live readings.
Change Wi-Fi
Connect your device or locally → Settings → Wi-Fi & Bluetooth → Change network → Find networks → Connect to Wi-Fi. Your account link stays in place.
Give it to someone else
Download any readings you want to keep. In the remote app: Settings → Sign-in & monitors → Remove or transfer monitor. Verify your email and confirm. This deletes the monitor’s remote history and reports; local readings and Wi-Fi remain. Separately forget the old network in local settings for a physical handoff. The new owner connects nearby and adds it with their own email. Transfer details.
Update
Check the model-specific update guide before installing anything. The current standalone build has no released wireless-update package matched to its wiring yet. Keep service access available. S9 Helios uses its own update screen.
If something stops
Check power, 2.4 GHz Wi-Fi and the password. For delayed uploads, keep the existing account link and check home Internet; do not repeat setup. For a missing activation, contact S9. Connection help.
S9 Pixmob
Have USB power, 2.4 GHz Wi-Fi and access to your email.
- Sign in while online. Open the IR app in your usual browser, choose Email me a code and verify it.
- Connect the controller. Power it and join S9-PixMob. Stay connected despite “No Internet.” Open the automatic setup prompt; R23 normally uses 192.168.50.1, older firmware 192.168.4.1.
- Save Wi-Fi. Find networks → choose your 2.4 GHz network → Connect and save. Wait for connected/saved.
- Add it to your account. Add to my email account → Copy temporary setup link. Return the phone to Internet, paste into the same verified browser, then Add remote to my account. The link expires after 15 minutes.
Start IR setup →
Everyday use
Open the IR app and select your existing remote. Point the emitter toward compatible lights. Applied confirms the controller received the command; IR has no acknowledgement from the lights.
Change Wi-Fi
Rejoin S9-PixMob → Find networks (or Pause lights & find Wi-Fi) → Connect and save. R23 remembers up to four working networks; a failed join keeps working saved networks. Return to the existing account.
Give it to someone else
Settings → Remove or transfer remote → Confirm email for removal, then confirm. Owner control is revoked, assigned shows/artwork clear and Off is queued. Personal account favourites stay. Saved Wi-Fi remains until Forget saved Wi-Fi is chosen on the setup page. Check the controller online before handing it over; offline copies can remain until reconnection. The new owner needs their own email and a fresh physical setup link. Transfer details.
Update
Keep USB and Internet connected. Select the remote → Off → Settings → Firmware & automatic updates → Check for updates. Wait for reconnection and confirm R23. Stop a looping show so installation can proceed.
If something stops
Offline: check USB and Wi-Fi. Online but lights do not respond: check light batteries, compatibility, emitter direction and distance. IR help.
Need help? support@s9sentinel.com · Include the product, step and displayed message. Never send passwords, PINs or email codes.