S9 SENTINEL

CONNECTION HELP

Get back to your device.

Your device and settings are saved. You usually do not need to repeat setup.

Start here

Check that your device is powered on, then open it as usual. On a new phone, use the same email.

Open my device

At home, keep your phone on its usual Wi-Fi. You do not need to join the device’s setup network for everyday use.

My device still won’t connect

Check its power cable and your home Wi-Fi. The app retries automatically. Keep the page open briefly, or tap Try again.

For S9 Helios, saved readings normally arrive about every 15 minutes. An older reading does not by itself mean the device has stopped working.

For live readings, your phone and device need the same home Wi-Fi. The app uses the saved address automatically.

Get help from S9
I changed my home Wi-Fi

Open your device, then Settings. Update its saved Wi-Fi if you can still connect. If you cannot, use connection help in the app to reopen device setup. Keep the same email; do not remove the device from your account.

This is a new device

Start setup once. The app skips what is already saved and continues after each successful step.

Set up device
Older devices and advanced connection help
Older monitor software: connection instructions

Detailed instructions for the monitor interface: Menu, Connect your device and Saved readings. For current software, use Set up device above.

Set up my monitorShow answer

Set up my monitor

Connect my device

  1. Power on and join S9 Helios or S9 Monitor (older units: S9-Energy). Within five minutes, choose your monitor in your phone’s Wi-Fi settings. Password: S9Energy2026. Stay connected if it says “No internet”.
  2. Choose your home Wi-Fi and enter its password. The connection form opens automatically on supported phones. Tap Connect to Wi-Fi and wait for “Wi-Fi connected”. Use a 2.4 GHz network.
  3. Add to my account. Enter your email on the connected monitor’s setup page and tap Email me a code. Switch your phone back to home Wi-Fi or mobile data, tap Continue setup and enter the six-digit code. Use the same email for every monitor. If Add to my account is missing, update the monitor first.

The connection form didn’t open

While connected to S9 Helios or S9 Monitor (older units: S9-Energy), open the Wi-Fi form. If that does not open, use the Router address in your phone’s Wi-Fi details. Older monitors open their readings page instead; tap Menu → Settings → Wi-Fi & Bluetooth to add Wi-Fi.

If S9 Helios or S9 Monitor (older units: S9-Energy) has disappeared, restart the monitor to reopen its five-minute setup window.

Save the setup guide

Next time, open My monitor. Choose Connect your device for live access, or Saved readings for updates from anywhere.

Connect or reconnectShow answer

Connect or reconnect

I can’t connect

For everyday readings, choose Saved readings and sign in with your email. First time? Connect your monitor to Wi-Fi and verify your email.

  • Nearby: in Wi-Fi Ready, connect through the same home Wi-Fi. There is no five-minute connection window.
  • Saved readings: view saved uploads from anywhere with internet.
  • For home Wi-Fi access, use Wi-Fi Ready.

Android or computer steps · iPhone steps

New phone, missing address or no S9 Wi-Fi network?

For everyday readings on another phone, open your monitor and sign in. For nearby Live View or settings, join the same home Wi-Fi as your monitor. S9 Helios or S9 Monitor (older units: S9-Energy) is a monitor name; its own Wi-Fi normally appears only during setup.

  • On a connected phone, open Menu → Settings → Wi-Fi & Bluetooth → Address for another phone or PC → Copy address.
  • Open that address on the new phone and bookmark the readings page.
  • The address box needs this web address, not your Wi-Fi name or password.

Saved links belong to each browser. If no device can connect and you have no saved address, restart the monitor and use its five-minute setup window.

My Wi-Fi won’t connect

  • Use the Wi-Fi connection form, or Menu → Settings → Wi-Fi & Bluetooth on the nearby page.
  • Check the password, move closer to your router and use a 2.4 GHz network.
  • Allow up to 35 seconds and wait for the connection result.

Show Wi-Fi setup

The nearby Wi-Fi page won’t open

Use the same home Wi-Fi as your monitor. Open its bookmarked address, not just the public website. Guest Wi-Fi may block the connection.

  • Try the number address under “If the name does not open”.
  • If both saved addresses fail, restart the monitor to open its five-minute setup window, then find the current address in Settings → Wi-Fi & Bluetooth.
  • Bluetooth is normally off in Wi-Fi Ready.

Can I use it away from home?

the apping: see saved solar and battery readings on iPhone or Android, including over mobile data. Your monitor stays connected to home Wi-Fi with internet and uploads about every 15 minutes.

Open remote viewing. First time? Choose Add to my account on the monitor’s Wi-Fi setup page or in Connect your device → Settings → the apping. Enter your email and verify the code we send. Sign in with the same email on a new phone. You never need to keep a setup code.

The page shows when readings were last uploaded. Opening it does not start Live View. Uploads use some extra battery power. If Add to my account is missing after updating, contact support.

If the last update is old, check the monitor’s power and home internet. Saved readings stay visible; new uploads resume when it reconnects. A long outage can leave gaps.

Online history keeps 30 days of quarter-hour readings and a year of daily summaries. Download readings to keep your own copy. Daily summaries appear after a completed day is processed.

I forgot my Bluetooth PIN

New monitors start with 123456. If you changed it and cannot remember it, email support. After changing a PIN, forget its S9-Energy entry in your phone’s Bluetooth settings and reconnect.

Connect with Android or a computer

  1. Turn on Bluetooth. Keep your monitor powered on and nearby.
  2. Open nearby connections. Tap Bluetooth and choose S9 Helios or S9 Monitor (older units: S9-Energy). If home Wi-Fi is already set up, choose Home Wi-Fi instead.
  3. Enter the PIN if asked. New monitors start with 123456. Your readings appear once connected.

Bluetooth is off in Wi-Fi Ready; use your saved home Wi-Fi address. Bluetooth Ready allows nearby access. Use one Bluetooth viewer at a time.

Want to use home Wi-Fi too?

Nearby connection options

Wi-Fi Ready allows home Wi-Fi access while the processor saves power between tasks. There is no timed connection window to wait for.

  • Wi-Fi Ready: connect on the same home Wi-Fi without waiting for a timed window. Works with iPhone and Android. Bluetooth is off.
  • Bluetooth Ready: optional nearby access with Android Chrome. Home Wi-Fi is off between Remote uploads.

To change a mode, connect Nearby and open Menu → Settings → Wi-Fi & Bluetooth → Connection mode. Save your choice there. Selecting Connect your device or Saved readings in the app does not change it.

Watch live readings to position my panel

  1. Connect and tap Start Live View. It runs for five minutes.
  2. Move the panel a little. Avoid shade and watch Solar power now. Higher means more power at that moment.
  3. Tap Finish Live View when done. It also stops automatically.

Live View uses much more battery power. Use it briefly for panel placement or troubleshooting.

  • Wi-Fi Ready and Bluetooth Ready provide access without timed connection windows.